93490-3W110 Automotive Clock Spring Airbag Spiral Cable For Hyundai

93490-3W110 Clock Spring Airbag Spiral Cable For Hyundai

Specification:

Model Number: 93490-3W110

Part Name: Clock Spring

Suitable car: Hyundai Elantra

Year.: 2004-2016, 1989-2016, 2005-2010

Size: Standard Size

Warranty: 12 months

Stocks: Available
Packing: Neutral Packing

Condition: 100% new

Matching car information:

Suitable for : FOR HYUNDAI SONATA ELANTRA 2011 2012 2013 2014

More Popular Product :

What is the clock spring ?

An airbag clock spring is used to connect the steering wheel to other electrical devices such as the airbag safety system, radio volume and station selections, horn and cruise controls. A clock spring can become faulty when wires become worn and break causing a short or open circuit. This can cause the airbag warning light to come on. Horn, radio controls and cruise controls can also stop as well.

What is the Symptoms of a bad clock spring?

Here is a list of some of the most common problems :

Airbag light is on: The airbag or SRS light turning on. A common problem often caused by a defective clock spring. If you scan the airbag system using a diagnostic scanner you may get any of the following errors:

Driver Airbag Squib Circuit High Resistance

Airbag circuit resistance too high

Driver Side Air Bag Circuit High Resistance or Open

Driver squib circuit open!

What is the locations of clock spring?

The clock spring is located in the steering column and is mounted right underneath the steering wheel. The clock spring has wires that connect to the airbag and steering wheel buttons and on the opposite side has an electrical wire harness plugged into it.

How do we confirm that clock spring is in the zero position during transportation and installation?

There are several types of clock springs. Each type has a different way of neutral position. Generally, the label or plastic parts on the clock spring will write it. Generally, it is written that the inner ring of the clock spring is rotated clockwise (or counterclockwise, which is related to the design) to the end, and then how many turns are reversed (2, 2.5, and 3 are possible) to make the plastic The two shell centering symbols are aligned, expressed as a neutral position, which is the zero position you say. Be sure to read the alignment instructions on the clock spring!

FAQ:

1. Do you receive sample order?

Yes, we do.

2. Can you produce according to the samples I offer you?

Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

3. What's the warranty policy?

12 months

4. What’s the location of your company?

Our company is located in Guangzhou,China

5. How to get a quotation?

Please kindly advice the OE number, color, picture, VIN, .etc and send your email to us.

CONTACT US:

Contact Person: Miss. Jane

Tel: +8615002030283